How To Make A Sliding Box Sash Window In Reading

If you're looking to make a sliding box sash window in Reading, you've come to the right place. Sash Windows Berkshire are a sash windows company in Reading who have been providing quality sash windows to the South East of England for over 30 years. We understand the importance of a well-made sash window and the elegant touch it can add to a home.

To create a sliding box sash window, there are a few things that you'll need. Clips, screws, a few tools and some elbow grease are all you'll need to get started.

What You'll Need:

• Clips
• Screws
• A screwdriver (preferably a flat head screwdriver)
• A tape measure
• A saw
• Weights
• Sash cord
• Sashes
• Frame

Keep The Weights

Firstly, you'll need to keep the weights. These are the counterbalances to the sashes and are what help the window stay in place. It's important to keep them with the same sash as they were in before you started. This will help the window stay balanced and function correctly.

Lift The Sashes

To begin making a sliding box sash window, start by lifting the sashes out of the window frame. You're going to need to detach them from the sash cord by untying the knot that connects them.

Place The Window

Next, its time to place the window. Measure the window for height and width. Its important to use accurate measurements, so double-check before you cut anything.

Keep The Weights Again

Once you have the measurements, keep the weights nearby. You'll need to attach them to the cords and lift them back into place once the sashes are back in the frame.

Going Into The Frame

With everything in place, it's time to begin fitting the window into the frame. Ensure that the frame is clean and free from debris. If it's not, use a flathead screwdriver to clean it out.

The Balance and Spring

The next step is to install your spring balance. This is the mechanism that helps keep the window in balance and allows it to stay open while pushing it closed.

Replacement of The Bottom of The Window

If you're replacing the bottom of the window, it's important to mark the window frame before removing it. Use a piece of tape to identify the location of the frame so that you can install the new one in the right spot.

Removing The Stops

Once the bottom frame is removed, you'll need to remove the stops. These are the pieces of wood that prevent the sashes from rising too far. Use a flathead screwdriver to remove them.

The Rising of The Sashes

With the stops removed, the sashes should rise freely. If they don't, remove the top part of the window frame and adjust the cord until they do. Once the sashes are rising far enough, use the screws to secure them.

The Stops Might Be Needed or Not

You might need to reattach the stops or add new ones if they're missing. You can use the same screws or add new ones if the sashes aren't rising far enough.

The Spring Release

At this point, you'll need to release the tension on the spring balance. This is done by pressing down on the white release clip located at the top of the balance.

The Spring Balance

Once the tension is released, remove the balance from the frame by gently pulling it out. Now, slide the new balance into place and secure it with two screws.

Don't Forget The Window

Now, it's time to reattach the window. Slide it into place and secure it with the screws. Finally, reattach the sash cord and tie a knot to keep it secure.

Congratulations! You've just made a sliding box sash window in Reading. If you ever need help or have questions, please don't hesitate to contact us at Sash Windows Berkshire. We're always happy to help with any window-related issues, and our experienced team will be more than happy to assist you.